How do you set parking brake maintence mode on 2016 Ford Fusion for replacement for rear bnrake pads? ?
- CactiJoeLv 62 months ago
You have to chock the front wheels and set the tranny to either park or neutral.
- notLv 72 months ago
Turn ignition to on. Hold wide open throttle plus the park brake switch to the release position. While holding throttle and switch: turn ignition to off then back on within 5 seconds. dash should indicate maintainence mode now. Now turn ignition off and then you can release throttle and switch.
Calipers should compress easily like a regular caliper.
After service you must remove from maintainence mode. It is the same procedure with one change: Hold brake switch to apply NOT release.