The bolt screw to unbolt the spare tire in my toyota camry is stuck.?
- hartLv 64 weeks ago
Use WD 40 or hit steel bolt with the hammer to loosen off the rust
- Anonymous4 weeks ago
Try your best possible as you can.
- zipperLv 61 month ago
Take it back to Japan and get it fixed!
- Anonymous1 month ago
Check to make sure there is no locking pin in the nut that is preventing you from turning it. Most of the time the tire just lays there over the stud and is not fastened down.
- What do you think of the answers? You can sign in to give your opinion on the answer.
- thebax2006Lv 71 month ago
Then use a tool to unscrew it!
Call a tow truck if you don't have tools and have a flat tire.
- don rLv 71 month ago
Try sliding the tire side to side as you wiggle the bolt and unscrew it. You might use a crescent wrench on the handle until you get it started coming loose. If push comes to shove, it might help to let a few pounds out of the tire to relieve tension. Don't forget to pump the tire back up to 32 Lbs. Put a dab of grease on the hole before you put the bolt back. Good luck.
- STEVEN FLv 71 month ago
IF all else fails, BREAK IT. The vehicle can operate as safely without the spare being secured wherever it is stored.
- JetDocLv 71 month ago
That's nice. Would you like to ask a question while you're here?
- GregLv 71 month ago
Liquid wrench, tap it, wait, apply some more, tap it, and try.
- Aster RhoidsLv 61 month ago
Lefty loosy righty tighty