• Is a window unit air conditioner easy to fix when it stops being cold, but the vent air works, but on cool mpde it starts beeping buzz alarm?

    Best answer: NO. Window A/C units are ot easy to fix. If it requires more than cleaing, the PARTS will cost more than replacement, assuming you can eve FIND parts.
    Best answer: NO. Window A/C units are ot easy to fix. If it requires more than cleaing, the PARTS will cost more than replacement, assuming you can eve FIND parts.
    9 answers · 1 day ago
  • Microwave blows fuses infrequently?

    I replaced the 20a fuse on my GE microwave oven. A month later, I replaced the fuse a second time. Is it safe to try a 25a fuse? How can I troubleshoot this problem? Is it likely to be a failing HV capacitor?
    I replaced the 20a fuse on my GE microwave oven. A month later, I replaced the fuse a second time. Is it safe to try a 25a fuse? How can I troubleshoot this problem? Is it likely to be a failing HV capacitor?
    10 answers · 2 days ago
  • Plugged two appliances into same outlet. Outlet stopped working 2min later but breaker didnt go?

    Plugged a mini fridge and mini microwave into the same outlet. The outlet was on it's own circuit with nothing else. They both worked for about 2min and suddenly stopped but the breaker didnt flick. So did I break the outlet then? They are now running perfectly fine in the next outlet over that's... show more
    Plugged a mini fridge and mini microwave into the same outlet. The outlet was on it's own circuit with nothing else. They both worked for about 2min and suddenly stopped but the breaker didnt flick. So did I break the outlet then? They are now running perfectly fine in the next outlet over that's actually a shared circuit with computers. I'm just confused on what happened? My dad said because the fridge and microwave were so low powered they'd be fine in the same outlet and currently are but what happened with the first outlet?
    12 answers · 4 days ago
  • About washing disches machine?

    7 answers · 3 days ago
  • What tool works best to remove a tight bolt?

    I recently had to switch my Kenmore dryer from a 3 prong cord to a 4 prong cord, but I am having trouble removing one of the bolts on the back off. I’ve tried and wrench and it doesn’t work. I’m not sure what size that bolt is, but it’s green and it contains the grounding wire. Any suggestions? It’s not rusted or... show more
    I recently had to switch my Kenmore dryer from a 3 prong cord to a 4 prong cord, but I am having trouble removing one of the bolts on the back off. I’ve tried and wrench and it doesn’t work. I’m not sure what size that bolt is, but it’s green and it contains the grounding wire. Any suggestions? It’s not rusted or anything just really tight.
    17 answers · 6 days ago
  • What's wrong when your water won't get hot all of a sudden in your home?

    I haven't had this water heater too long, meaning it's practically almost brand new. All of a sudden last week I got in the shower and the water was so hot it almost burnt me. Usually my water would be just right. It got so so hot. Now a couple of days later, it won't get hot at all. What could be... show more
    I haven't had this water heater too long, meaning it's practically almost brand new. All of a sudden last week I got in the shower and the water was so hot it almost burnt me. Usually my water would be just right. It got so so hot. Now a couple of days later, it won't get hot at all. What could be wrong? BTW I went to the circuit box and and flipped the switch and still no hot water.
    6 answers · 3 days ago
  • Electric water heater problem?

    I was wondering who do I call to fix an electric water heater that isn't working an electrician or a plumber. I have an issue where it tripped the breaker and isn't heating the water. So should I call electrican or plumber ?
    I was wondering who do I call to fix an electric water heater that isn't working an electrician or a plumber. I have an issue where it tripped the breaker and isn't heating the water. So should I call electrican or plumber ?
    11 answers · 5 days ago
  • My AC does not blow cool air. Inside unit is running. Filter ok. Thermostat ok. Outside unit is also running .. fan blowing in full speed.?

    Best answer: It sounds like your compressor has shut down and what is running are the fans. In situations like this, the reason why the compressor has shut down is because of low freon. The could be one other reason. And that you coils in the outside unit are so dirty that the unit is getting too hot. You are at peak... show more
    Best answer: It sounds like your compressor has shut down and what is running are the fans. In situations like this, the reason why the compressor has shut down is because of low freon. The could be one other reason. And that you coils in the outside unit are so dirty that the unit is getting too hot. You are at peak temperature days right now, where demand is high and heat transfer is at its maximum. Enough to shut the unit down. So wash off the coils with a garden hose and restart the outside unit with the reset button. Call an AC man.
    7 answers · 4 days ago
  • I'm roofing a 10x30 porch and I am doing this by myself, How can I get 4x8 plywood on the roof rafters?

    The plywood is 3/4 OSB and its a lot for one guy to lift. Could I cut it down the middle and install it that way? 2x8 would be much easier to handle
    The plywood is 3/4 OSB and its a lot for one guy to lift. Could I cut it down the middle and install it that way? 2x8 would be much easier to handle
    13 answers · 1 week ago
  • Electric water heater no hot water?

    My electric water heater isn't giving any hot water and I looked at the circuit breaker to see if it was tripped and it looks like it is. There are 4 switches for the water heater on the breaker and the top switch which has a 20 on the switch is halfway between on and off and the other three switches which are... show more
    My electric water heater isn't giving any hot water and I looked at the circuit breaker to see if it was tripped and it looks like it is. There are 4 switches for the water heater on the breaker and the top switch which has a 20 on the switch is halfway between on and off and the other three switches which are marked 40 are fully on should I turn the top switch on and off. In a way I'm kind of nervous to do this because there's a big warning on the breaker lid saying turning on the water heater with no water in it could damage internal parts but I have no way of knowing if there is water currently in the water heater and I don't wanna damage anything. My guess is that there is water in there. This just betelybhappened maybe yesterday or something. Something tripped that breaker I guess because we had hot water just fine before that. What is the Likely hood that there is no water in there? As far as I can see the breaker switch did move should I just move the switch back and not worry about the amount of water currently in the heater. Please help
    9 answers · 6 days ago